Free custom mockup on orders of 5,000+ pieces. Under 5,000, a flat $100 fee, invoiced only once you approve the brief. Start yours →
Coffee Roasters

Packaging that protects the roast, not just the beans.

Degassing valves, foil-grade barrier and a shelf presence worthy of what you paid for the green.

Get a free mockup See all specs
Custom kraft coffee pouch with a copper degassing valve and an oxblood label, beside roasted beans
The problem

Your roast, packing schedule and shelf-life target belong in the same packaging brief.

Plan the valve and barrier together. Your roast, packing schedule and intended shelf life guide the specification; a valve alone does not address oxygen protection.

Recommended formats

Built for coffee roasters

Stand-up pouch for 1 lb ground: a deep teal bag with a small white wordmark at the top, a very large origin word COLOMBIA, a tasting line CARAMEL ORANGE under it, a small MEDIUM roast flash and a one-way valve
SUP

Stand-Up Pouch

A bottom gusset opens into a base for an upright, front-facing shelf display.

Explore Stand-Up Pouch
Flat-bottom valve bag for 12 oz whole bean: a warm cream bag with a small dark-green roastery mark at the top, a large three-word tasting line BLUEBERRY COCOA JASMINE filling the middle, smaller origin lines ETHIOPIA and WASHED beneath it, a short roast-level bar near the base, and a matte silver one-way valve high on the front
FBP

Flat Bottom / Box Pouch

A defined square base and five printable panels for coffee, tea and specialty foods.

Explore Flat Bottom / Box Pouch
Side-gusseted bag for 2 lb wholesale: an unbleached kraft bag left mostly unprinted, with a bold black wordmark, a large blend name HOUSE BLEND, a tasting line CHOCOLATE NUT and 2 LB at the base
SG

Side-Gusseted Bag

Side panels expand around the fill. The classic large-format coffee bag.

Explore Side-Gusseted Bag
Back-seal pillow bag for 8 oz retail: a burnt-orange pillow bag with a small cream wordmark, a large origin word BRAZIL, a tasting line HAZELNUT COCOA and a one-way valve
BS

Back-Seal Pillow Bag

A fin seal down the back, with or without side gussets. Efficient on film.

Explore Back-Seal Pillow Bag
Design and color variety

Coffee Roasters, in five builds.

These are the constructions and fill sizes the plant runs for coffee roasters. The build is fixed by what you pack; everything printed on it is yours to direct.

Flat-bottom valve bag for 12 oz whole bean: a warm cream bag with a small dark-green roastery mark at the top, a large three-word tasting line BLUEBERRY COCOA JASMINE filling the middle, smaller origin lines ETHIOPIA and WASHED beneath it, a short roast-level bar near the base, and a matte silver one-way valve high on the front
Flat-bottom valve bag12 oz whole bean
Stand-up pouch for 1 lb ground: a deep teal bag with a small white wordmark at the top, a very large origin word COLOMBIA, a tasting line CARAMEL ORANGE under it, a small MEDIUM roast flash and a one-way valve
Stand-up pouch1 lb ground
Side-gusseted bag for 2 lb wholesale: an unbleached kraft bag left mostly unprinted, with a bold black wordmark, a large blend name HOUSE BLEND, a tasting line CHOCOLATE NUT and 2 LB at the base
Side-gusseted bag2 lb wholesale
Three-side-seal sample for 1/4 lb single serve: a white pack with a small black wordmark, a single large origin word KENYA, a short tasting line BLACKCURRANT and a SINGLE ORIGIN flash in a thin box
Three-side-seal sample1/4 lb single serve
Back-seal pillow bag for 8 oz retail: a burnt-orange pillow bag with a small cream wordmark, a large origin word BRAZIL, a tasting line HAZELNUT COCOA and a one-way valve
Back-seal pillow bag8 oz retail

Each one is a construction and a fill size the plant runs for coffee roasters, shown in a different brand language. Every brand shown here is invented. These are design studies, not photographs of printed customer orders, and nothing pictured is a supplier specification.

The same build, four ways

One coffee bag, four directions.

The band above shows which constructions the plant runs for coffee roasters. This one holds a single one of them - a stand-up pouch at 1 lb ground, the construction we would start you on - printed four ways. Same bag, same size, same plant. The build is not the thing that decides how yours looks.

Minimal design direction on a coffee bag, a stand-up pouch: restrained type, one colour, nothing else on the face
Minimalrestrained type, one colour, nothing else on the face
Bold design direction on a coffee bag, a stand-up pouch: high-contrast colour blocking and oversized display type
Boldhigh-contrast colour blocking and oversized display type
Natural design direction on a coffee bag, a stand-up pouch: unbleached kraft with hand-drawn line artwork
Naturalunbleached kraft with hand-drawn line artwork
Premium design direction on a coffee bag, a stand-up pouch: a dark matte face with genuine foil blocking
Premiuma dark matte face with genuine foil blocking

Every brand here is invented and every frame is a design study, not a photograph of a printed customer order. Six more directions on this construction, or start a brief with it.

Structure

Why this stack, for this category

A matte printed face, an aluminium layer against light and oxygen, and a polyethylene sealing face. The valve belongs in this decision, not after it: a valve on a thin film releases roasting gas without protecting the coffee from oxygen.

Outer layer

MATTE PET12

Catalog page 8 prints this in a menu of outer, middle and inner options under the heading "the material structure can be customized". It publishes no approved combination and no unit for the gauge, so the layer order and the thickness are set with your quote.

Middle layer

AL7

Catalog page 8 prints this in a menu of outer, middle and inner options under the heading "the material structure can be customized". It publishes no approved combination and no unit for the gauge, so the layer order and the thickness are set with your quote.

Inner layer

PE(40/60/80/100/120)

Catalog page 8 prints this in a menu of outer, middle and inner options under the heading "the material structure can be customized". It publishes no approved combination and no unit for the gauge, so the layer order and the thickness are set with your quote.

Sizes

Where this category lands

Catalog sizeConstructionCatalog fill example
Custom size / recommend a sizeAnyNot published
13*21+4cmStand-Up Pouch1/4 lb(120g)
15*23+5cmStand-Up Pouch1/2 lb(250g)
18*29+5cmStand-Up Pouch1 lb(500g)
23*34+5cmStand-Up Pouch2 lb(1000g)
9*18.5+5cmFlat Bottom / Box Pouch1/4 lb(120g)
13*20+7cmFlat Bottom / Box Pouch1/2 lb(250g)
13.5*26.5+7.5cmFlat Bottom / Box Pouch1 lb(500g)
15*32.5+10cmFlat Bottom / Box Pouch2 lb(1000g)
9*27+5cmBack-Seal Pillow Bag1/2 lb(250g)
10*34+6cmBack-Seal Pillow Bag1 lb(500g)
13.5*41+7cmBack-Seal Pillow Bag2 lb(1000g)
14.5*(16+18.5)+4cmNot stated in the catalog100g
16*(17+20)+4cmNot stated in the catalog150g
17.5*(19.5+22.5)+4.5cmNot stated in the catalog1/2 lb(250g)
21.5*(23.5+27)+5cmNot stated in the catalog1 lb(500g)

Starting size to review: Share your target fill weight; final size requires supplier confirmation.

Features

ValveRegular zipperTear notchPull-tab zipper

Finishes

MatteSoft touchGold blocking
Other categories

We spec 12 of them

Tea CompaniesSpice & Seasoning BrandsSnack, Granola & Nut BrandsCandy & ConfectioneryBakeries & Cookie BrandsRice, Grain & Dry StaplesPet Treat BrandsSpecialty Food - Jerky, Trail Mix & GourmetBeverage & Liquid BrandsFrozen & Refrigerated BrandsCosmetics & Personal Care

See your brand on the pouch.

Free on 5,000+ pieces. A flat $100 fee below it, invoiced only once you approve the brief.

Request your mockup