Free custom mockup on orders of 5,000+ pieces. Under 5,000, a flat $100 fee, invoiced only once you approve the brief. Start yours →
Beverage & Liquid Brands

Packaging that pours as well as it sells.

Spouted pouches and liquid-ready structures for juices, smoothies, sauces and concentrates.

Get a free mockup See all specs
Citrus-orange spouted pouch with a white SQUEEZE wordmark and an orange screw cap, beside a halved orange and a glass of juice on a white counter
The problem

Fill temperature, viscosity and how the customer opens and pours it all belong in the same brief.

Start with the liquid, the fill volume and the filling temperature. The spout, the cap and the wall are one decision, because a filled pouch is handled wet and carries its own weight.

Recommended formats

Built for beverage & liquid brands

Spouted pouch for 250 ml juice: a bright citrus-orange spouted pouch with a white screw cap, a bold white wordmark, a large flavour line ORANGE MANGO, a small NO ADDED SUGAR roundel and 250 ml at the base
SPT

Spouted Pouch

A pouch with a spout and cap for sauces, purees and other pourable products.

Explore Spouted Pouch
Stand-up pouch for 400 g drink mix: a bright coral bag with a bold white wordmark, a large flavour line MANGO ICED TEA, a 20 SERVINGS flash and a photograph of a filled glass low on the front
SUP

Stand-Up Pouch

A bottom gusset opens into a base for an upright, front-facing shelf display.

Explore Stand-Up Pouch
Three-side-seal for single-serve drink mix: a pale aqua sachet with navy type and a thin wave rule, a flavour line LEMON ELECTROLYTE and a small ZERO SUGAR flash
3SS

Flat Pouch / 3-Side Seal

A slim three-side-seal pouch for laying flat or hanging. A starting point for samples and single portions.

Explore Flat Pouch / 3-Side Seal
Design and color variety

Beverage & Liquid Brands, in five builds.

These are the constructions and fill sizes the plant runs for beverage & liquid brands. The build is fixed by what you pack; everything printed on it is yours to direct.

Spouted pouch for 250 ml juice: a bright citrus-orange spouted pouch with a white screw cap, a bold white wordmark, a large flavour line ORANGE MANGO, a small NO ADDED SUGAR roundel and 250 ml at the base
Spouted pouch250 ml juice
Spouted pouch for 500 ml smoothie: a deep berry-purple spouted pouch with a cream wordmark, a large flavour line BERRY BLEND, a photograph of mixed berries low on the front and a clear side strip showing the fill level
Spouted pouch500 ml smoothie
Small spouted pouch for 50 ml concentrate: a flat black small spouted pouch with acid-yellow type, a large product word GINGER SHOT and 50 ml
Small spouted pouch50 ml concentrate
Three-side-seal for single-serve drink mix: a pale aqua sachet with navy type and a thin wave rule, a flavour line LEMON ELECTROLYTE and a small ZERO SUGAR flash
Three-side-sealsingle-serve drink mix
Stand-up pouch for 400 g drink mix: a bright coral bag with a bold white wordmark, a large flavour line MANGO ICED TEA, a 20 SERVINGS flash and a photograph of a filled glass low on the front
Stand-up pouch400 g drink mix

Each one is a construction and a fill size the plant runs for beverage & liquid brands, shown in a different brand language. Every brand shown here is invented. These are design studies, not photographs of printed customer orders, and nothing pictured is a supplier specification.

The same build, four ways

One juice pouch, four directions.

The band above shows which constructions the plant runs for beverage & liquid brands. This one holds a single one of them - a spouted pouch at 250 ml juice, the construction we would start you on - printed four ways. Same bag, same size, same plant. The build is not the thing that decides how yours looks.

Minimal design direction on a juice pouch, a spouted pouch: restrained type, one colour, nothing else on the face
Minimalrestrained type, one colour, nothing else on the face
Bold design direction on a juice pouch, a spouted pouch: high-contrast colour blocking and oversized display type
Boldhigh-contrast colour blocking and oversized display type
Natural design direction on a juice pouch, a spouted pouch: unbleached kraft with hand-drawn line artwork
Naturalunbleached kraft with hand-drawn line artwork
Premium design direction on a juice pouch, a spouted pouch: a dark matte face with genuine foil blocking
Premiuma dark matte face with genuine foil blocking

Every brand here is invented and every frame is a design study, not a photograph of a printed customer order. Six more directions on this construction, or start a brief with it.

Structure

Why this stack, for this category

A printed polyester face over a nylon layer, sealed with polyethylene. A filled pouch is heavy and gets handled wet, so the wall has to resist a drop as well as hold a barrier, and the spout and cap are specified with the filling temperature.

Outer layer

PET12

Catalog page 8 prints this in a menu of outer, middle and inner options under the heading "the material structure can be customized". It publishes no approved combination and no unit for the gauge, so the layer order and the thickness are set with your quote.

Middle layer

PA15

Catalog page 8 prints this in a menu of outer, middle and inner options under the heading "the material structure can be customized". It publishes no approved combination and no unit for the gauge, so the layer order and the thickness are set with your quote.

Inner layer

PE(40/60/80/100/120)

Catalog page 8 prints this in a menu of outer, middle and inner options under the heading "the material structure can be customized". It publishes no approved combination and no unit for the gauge, so the layer order and the thickness are set with your quote.

Sizes

Where this category lands

Catalog sizeConstructionCatalog fill example
Custom size / recommend a sizeAnyNot published
9*8+3cmSpouted Pouch50ml
10*17+3cmSpouted Pouch250ml
13*19+3.5cmSpouted Pouch500ml

Starting size to review: Share your fill volume and filling temperature; final size and spout require supplier confirmation.

Features

Tear notchRounded cornersHang hole

Finishes

GlossySpot UVMetallic effect
Other categories

We spec 12 of them

Coffee RoastersTea CompaniesSpice & Seasoning BrandsSnack, Granola & Nut BrandsCandy & ConfectioneryBakeries & Cookie BrandsRice, Grain & Dry StaplesPet Treat BrandsSpecialty Food - Jerky, Trail Mix & GourmetFrozen & Refrigerated BrandsCosmetics & Personal Care

See your brand on the pouch.

Free on 5,000+ pieces. A flat $100 fee below it, invoiced only once you approve the brief.

Request your mockup